setup srv1q

[ntouros]

hello i have just bought the robot srv1q and i dont know how to connect with pc . which are the necessary sterps for connection ?

also i have download the project from aforge.net for connection with but isn't connected.

[andrew.kirillov]

Hello,

I think you better visit official Surveyor website. There is support forum and a lot of information about how connect, etc.

[ntouros]

ok thank you i 've already full setup of srv1

converting from ad-hoc to infrastructure and now my robot is connected with my router with a static ip 192.168.1.99 but your application can't connected with it. Is there a bug or something like this ?

in firmware of srv1

IP Address: 192.168.1.99
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS Server: 0.0.0.0

ps. Your application working succesfully when i connected with ad-hoc

i changed because infrastucture mode is very fast and reliable

have a mistake ??

thanks

[andrew.kirillov]

i changed because infrastucture mode is very fast and reliable

have a mistake ??

Can you connect with another software to it when in infrastructore mode?

Check your IP settings, port, etc. Check that you can connect from Browser or telnet. If other applications work, then AForge.NET framework's sample should work also. If not, then debug.

[ntouros]

finally my srv1 has stuck

i took srv1 from another person , applying the same settings and workded succesfully

i don't know what is the wrong and not connected with any software

maybe i send the robot in the constructor corporation or i buy usb for configuration via serial port

thanks for your answers